Energi Elite E1.1
A Malaysian-brand wallbox with a touchscreen, RFID and app, priced well under the big names.
Quick Verdict
Pros
- Low price for a smart wallbox, from RM1,999
- 4.3-inch touchscreen, rare at this price
- RFID cards plus Wi-Fi app
- Local KL support team and installer
- SIRIM QAS type approval listed for the E1
Cons
- IP54 only, needs a covered porch
- 2-year charger warranty
- Less known outside Energi Elite's own channels
- Spec sheet is thin on dimensions and app details
Key Specs at a Glance
Full Technical Specifications
| Specification | Details |
|---|---|
| Power output | 7 kW (1-phase) · 11 kW · 22 kW (3-phase) |
| Max current | 32 A (7 & 22 kW) · 16 A (11 kW) |
| Voltage | 220–230 V single-phase / 400 V three-phase |
| Connector | Type 2 (IEC 62196-2), tethered |
| Cable length | 5 m |
| Connectivity | Wi-Fi, NFC |
| App | Energi Elite app (supported versions) |
| OCPP | Not stated |
| Load balancing | Not stated |
| User authentication | RFID card, app |
| Display | 4.3-inch touchscreen |
| Electrical protection | Type A + DC leakage, over/under-voltage, overload, short circuit, surge, temperature |
| Weatherproof rating | IP54 |
| Dimensions | Not published |
| Colours | Black; 200+ custom colours |
| Certification | TÜV, CE; SIRIM QAS type approval RGTI/48A/0426/S(26-1714) for E1 |
| Warranty | 2 years charger; 1 year installation (Energi Elite install) |
| Sold in Malaysia by | Energi Elite, EV Sifu |
Will it work with my EV?
Yes. It has a tethered Type 2 plug, which every EV sold in Malaysia uses, from Proton to Tesla.
Your actual charging speed will depend on the lower of two limits: the charger’s rating and your car’s onboard AC charger (many EVs cap AC charging at 7 kW or 11 kW, so a 22 kW wallbox won’t push them any faster).
Will it work with my home?
Most landed homes are single-phase, so the 7 kW E1.1 (32 A) is the one to pick.
Installing the 11 kW or 22 kW version requires a three-phase electrical supply. Having three-phase isn’t the end of it. Your installer still has to check there’s spare capacity once the aircons and water heater are counted.
Charging Speed & Overnight Time
On single-phase, a 7.4 kW unit adds roughly 35 to 40 km of range per hour. Plug in after dinner and most cars are full by morning.
Faster only counts if your car and your DB can both take it. For daily driving, 7.4 kW overnight is plenty.
| Power Rating | Est. Speed (km/hr) | 0–100% (60 kWh Battery) |
|---|---|---|
| 7.4 kW (Single-phase) | ~35–40 km/hr | ~8–9 hrs |
| 11 kW (Three-phase) | ~55–60 km/hr | ~5–6 hrs |
| 22 kW (Three-phase) | ~110–120 km/hr | ~3 hrs |
Total Installed Price in Malaysia
- Charger unit
RM1,999–2,699 (Energi Elite) - Standard installation
RM800–1,200 - Long cable run >10m
+RM300–600 - DB box upgrade
+RM500–1,000 - Three-phase supply upgrade
+RM2,000–5,000 - Concealed wiring
+RM500–1,500 - Estimated all-in
RM2,500–3,000+ (Energi Elite installed) - Your real price depends on your home. Get quotes from installers.
Find an installer →
Installation & Safety
A good charger badly wired is still a bad charger. For the Energi Elite E1.1, a proper job includes:
- A dedicated EV circuit originating from your distribution board (DB).
- Cable sized for hours at full load. A 32 A charger runs flat out all night, so undersized wire will cook.
- Proper earthing and surge/circuit protection.
- A load check before anything is drilled, so you know your supply can carry it.
- Full testing and compliance with Suruhanjaya Tenaga (Energy Commission) EVCS guidelines.
- Assistance with TNB application (if supply upgrades are needed).
Smart Features
- Touchscreen: 4.3-inch display shows current, voltage and session data
- Start options: RFID card or app
- Scheduled charging: through the app on Wi-Fi models
- Adjustable current: set to suit your DB
- Custom colour: over 200 options
Dynamic Load Balancing
Energi Elite doesn’t list dynamic load balancing for the E1.1. Your installer will cap the current at a safe fixed level instead, so ask them to size it with the aircons running.
Cable & Everyday Convenience
It comes with a 5m tethered Type 2 cable. Check where your car’s charge port sits and if you reverse in, so the cable reaches without strain.
Weather & Durability
It’s rated IP54, so splashes and light rain only. Under the porch roof is the right spot, away from afternoon sun.
App User Experience
Wi-Fi models pair with Energi Elite’s app for scheduling and monitoring. If the Wi-Fi doesn’t reach the porch, RFID and the touchscreen still work offline.
Is the Energi Elite E1.1 right for you?
Single-phase landed home
Three-phase landed home
Condo resident or JMB
Ready to get quotes?
Get quotes from verified installers across Malaysia who supply and fit Energi Elite E1.1.
Compare Alternatives
Teltonika TeltoCharge
Will it work with my EV? Yes. It charges through Type 2, tethered or…
Read review →Zeeda Energy E Series (Zhida/ZD)
Will it work with my EV? Yes. It charges through Type 2, the standard…
Read review →Frequently Asked Questions
Only the 22 kW model, on three-phase with spare capacity. Single-phase homes get the 7 kW.
Yes. It charges through Type 2, the standard on every EV sold in Malaysia. Real speed is the lower of the charger rating and your car's onboard AC charger, usually 7 to 11 kW.
Most terrace and semi-D homes are single-phase, which tops out at 7.4 kW. Three-phase is more common in bigger or newer homes. Your TNB meter or installer can tell you.
At 7.4 kW, about 35 to 40 km of range per hour. A 60 kWh battery goes from 20% to 80% in roughly 5 hours.
Energi Elite lists the unit at RM1,999 to RM2,699 depending on power. Its installed prices start around RM2,500 single-phase, RM2,800 for 11 kW and RM3,000 for 22 kW. EV Sifu offers install at RM1,250 single-phase or RM1,350 three-phase.
It's IP54, which covers splashes only. Mount it under the porch roof.
2 years on the charger. Energi Elite's own installs add 1 year on workmanship, extendable to 2.